Jan 16, 2020
To help get you started with your device, please review this short tutorial video:
Tutorial Video: Eon 2.0 GPS Tracker Getting Started
Click the attachment below to view or download the full manual for the Eon 2.0 GPS Tracker.
DEVICE RELATED
Please charge the device using the included AC adapter for 24-48 hours. A red light will flash to indicate the unit is charging. The LED will flash to indicate the device powering on and attempting to connect to the network. Place the device on the dashboard of your car, facing skyward, and take it on a 20-minute drive to connect to the satellites and network.
While charging, the LED blinks red once every 10-15 seconds. The LED will glow solid red when the device is completely charged. At no other time does the LED glow or blink.
This unit has no power button and no indicators which help make it more covert.
Our GPS devices ship out pre-activated. You can log in to our tracking platform by going to www.brickhousesecurity.com, hover over Login at the top and select GPS on the drop-down menu and use the login information that will be emailed to you. You can also log in here.
If you haven’t received your login email, please check your spam filters in your email address. You can call us at 800-654-7966 or contact us here.
If you didn't purchase your device pre-activated, please visit our Activations page here.
The battery life of any motion-sensitive device, like a GPS tracker, depends on how often it detects movement. The 1-minute tracking interval will give you around 90 tracking hours. You can set the device to report less often to preserve the battery life. When the device is not moving, the battery will last longer as it is not being used as extensively.
This unit doesn't have a separate battery pack. If you suspect that the battery life is not enough for your particular needs, we suggest you use a different unit like our hardwired Livewire units or our TrackPort GPS.
All GPS devices transmit information when it is moving. The battery information comes from valid GPS messages sent from the device to our servers. The site displays the last valid battery indicator message that was received. If your device wasn't outdoors, in a good GPS area, or wasn't in motion, the battery indicator messages will not have been received from the site for the battery percentage to be updated.
TROUBLESHOOTING
Please make sure the tracker is powered on by pressing the power button until you see LED lights lit up. Place the device where it has a clear line of sight to the sky and take it on a 20-minute drive. Remember that your device reports in 1-minute intervals so the device needs to be sensing movement for at least a couple of intervals for you to get a report.
GPS devices often drift when reporting their location depending on the surrounding of the GPS device. Every time the device sends a new location, it receives information from the GPS satellites. This calculation can differ slightly and buildings, trees, and the atmosphere can affect the quality of the location that the device provides.
This could be a compatibility concern with the web browser that you are using. We optimized our GPS Platform to function best on widely used web browsers such as Mozilla Firefox and Google Chrome. If you are having problems viewing certain features on our site, we recommend that you view it through Mozilla Firefox. You can download and install it for free at http://www.mozilla.org/en-US/firefox/new/.
Please try to clear the cookies and cache on your phone's internet browser and load the page again. You can also try using another internet browser on your phones such as Dolphin - which is available for free in the iTunes and Google Play store. If you are still having problems, you will need to contact your mobile carrier or phone manufacturer for support. You can alternatively use our free app.
The street view is a feature provided by Google Maps who is our preferred mapping vendor. Google occasionally updates these images on their own.
If the battery died on your Eon 2.0 and you recharged it, you must also power it back on, as the device will stay powered off. Please hold down the power button up to 3-4 seconds or until you see the lights react.