What do I do with my Spark Nano 4 as soon as I receive it? We recommend the device be charged via the AC adapter that is included with it for a minimum of 6-8 hours. Then power the device by holding down the button on the top of the device for 3-4 seconds. You will see a light flashing to indicate the device powering on and then attempting to connect with the network. Please take the device with you and place it on the dashboard of your car, facing skyward. It also helps to take the device on a drive for about 20-30 minutes since it is motion sensitive.
How do I know if my Spark Nano 4 is charging? There will be a blue LED light flashing on the front face of the device on the battery indicator.
How do I turn the Spark Nano on/off? You will press and hold the power button on the top of the device for about 4-5 seconds and release. You will then see the lights solid until it is booted up fully and then the GSM and GPS LEDs will blink (Blue and Green). Give it about 10-15 seconds to be fully booted up upon powering on.
You will do this again to power it off. You will see the red battery light turn solid for up to 30 seconds as it cycles down, it will then be fully powered off. Do not push the button again, just wait for the red LED to turn off.
How do I activate my device? All of our Devices ship out already activated. You simply need to log into our Platform site by going to www.brickhousesecurity.com, hover over Login at the top and select GPS Tracking on the drop-down menu ( gps.brickhousesecurity.com) and use the login information that will be emailed to you. If you haven’t received your email yet then the programmers are in the process of making your acct and you will receive it as soon as they are done. Please also check your spam filters in your email address to be on the safe side.
How long will my battery last?How often will they track? This is all depending on how often the device is used because it is motion sensitive and you have a choice of tracking intervals. Please be aware that you are not limited to 1-minute tracking. Depending on your needs you can have the device track less often for more battery life (but also less detail). The default tracking interval of 1-minute tracking will give you about 20 hours of continuous motion tracking. When the device is parked and unmoving, it will last longer since the battery is not being used as extensively.
Example: If a car moves for an hour a day, expect the battery to be charged about once every 2-3 weeks or so.
How long do I charge the Extended Battery kit for? The extended battery pack/kit does not come with a separate charger, so you will use the same one that came with your Spark Nano 4.0. Please charge the Battery Pack along with your Nano and charge it for about 60 hours to get a full charge. Once it is fully charged, make sure the device is powered on and you are ready to track. You can see a diagram for how to plug the Battery Pack into the Spark Nano at the following link. http://help.brickhousesecurity.com/customer/portal/articles/1302655-spark-nano-4-0-extended-battery-diagram
Why did the battery status online read full for the extended battery for a period of time and then start dropping rapidly? Please be aware that the Extended Battery will read it's full status until it dies out. If you charged it up to 100% or as close to that, it will read at that status until it is depleted. Once it is depleted, the battery status on the website will be listed for the Nano and that will change as the Nano's internal battery drains down. This is when you want to recover the battery pack and Nano and charge them together back up for 60 hours again.
I have the Spark Nano Extended Battery Fast Charge Cable, how long do I charge the Battery Pack for? If you have purchased the optional Fast Charge cable, it will cut down your charge time to about 20 hours. This is an optional accessory that will not come with the Nano or the Battery Pack. Please see our website for this item or feel free to call one of our product specialists to purchase it. You will charge the Nano and the battery pack together.
I just charged my device and it isn't displaying 100% battery. Why? These devices work on motion activation only. The battery information comes from valid GPS messages sent from the device to our servers. The site displays whatever the last valid battery indicator message that was received. So if your device wasn't outdoors, in good GPS or T-Mobile 2G data signal, or wasn't in motion then those battery indicator messages will not have been received from the site to be updated.
--gps.brickhousesecurity.com Frequently Asked Questions-- Please click on a question below to be brought to that article.
Is there an app for my cell phone or tablet? Yes. Currently available for Apple and Android. Search for the Brickhouse Trackview.
Please note if your unit was purchased prior to 7/5/15 it may not currently be compatible with the Trackview app. Please contact our support team at 800-654-7966 to inquire about upgrading your account to support the Trackview App
How can I change my password or username? In the upper right section of the header near the Logout link, it will state Welcome and your name. If you click on your name you will have the option to change your password. If you have forgotten your password and cannot login simply click on the Forgot Password link. The site will ask for your username that you were assigned and your email address.
The username cannot be changed, it is automatically generated for record keeping purposes.
What do all these colors points/dots on my map mean? When viewing the history (breadcrumbs) of a device there is a difference to the status of the for each icon that is shown. The green and white arrow icon will show the direction of travel while moving. The stop sign shows when the device made a 0mph locate or was stopped. Other color icons can represent if there was a particular alert triggered (Example: The target entered or left a geofence zone) at that location.
What is a Breadcrumb trail? A breadcrumb trail is a historical path that a device has taken. Think of this as if the device left "breadcrumbs" during the travel and these "breadcrumbs" can be reviewed at a later date to see the path. The line connects the breadcrumbs to give you a visual trail of the trip that was made.
What is the Live Tracker Window? The “Live Tracker” button will open up a separate window displaying your device’s location, as well as allow you to see past locations. Using the drop-down boxes on the bottom right of the window, you can adjust how often your screen refreshes and how many locations will appear on the screen. The counter on the bottom left of the window displays how long it will be until your screen refreshes.
The “Set Refresh” is only to refresh the tracking page on your screen and will not affect the tracker itself and how often it locates on the map.
What is a Report? Reports are a way to get the historical information for the devices out of the platform in an easy to understand list-like format.
How do I run a Report? The reports can be opened from the menu bar at the bottom of the page. There are 4 different report types: Start/Stop, Alert History, Full History, and Frequent Visits. All reports have the ability to select the device (if there are multiples) and a date range to report.
How can I print this information out so I save it or email it? Yes, reports can be saved as Microsoft Excel documents that can be used as any other document. These documents can be saved, emailed and printed. Simply click on the tiny Microsoft Excel symbol where it appears and chooses where to save your report on your computer.
How do I see where my target was on a certain date in the past? This can be done through a report. Use the Full History report and search for the day that you would like to find the location of the device. Each time that the device reports this time will show on the report with the address of the device. This address can also be selected to show within Google Maps by clicking on it.
What is a Geofence? A geofence is a defined boundary area that allows alerts to be triggered when a GPS device passed in our out of this area. Within the platform, geofences can be created that are circular, polygon or the path of a route.
How do I set up a Geofence? From the Menu bar at the bottom of the page, select the Geofence button under the Alerts section. From within the Geofence Alert setup select the 'Create New Geofence' tab at the top of the page. Within the map view move and zoom the map to the desired location that the geofence will be created. Select which type of geofence to create next to 'Map Control'
Circle - To draw a Circle click on the map. Hold down and drag the radius out.
Polygon - To draw a Polygon click on the map. Click to create each vertice.
Route - To draw a Route click on the map. Click to create each turn.
The clear button can be used at any time to start over with the creation of a new geofence. After the geofence has been created on the map, name the Geofence. The Route Buffer provides an area around Route geofences, otherwise, the area would be a single line. The description field is optional and any information about this geofence can be entered. Once completed select the 'Save' button at the lower right of the page.
The tracker must locate within the geofence in order to send out an alert. Make sure that you make your geofence large enough so that your tracker can locate in it. We do not generally suggest making a geofence around just a driveway or single house, but rather the block that the house is on.
Can I have the location of my tracker sent to me via email or text message automatically? How? There is the ability of the platform to send email notifications when alerts are generated in the system. These alerts can include geofence, speed, panic and battery. There is also the ability to use your mobile device to view the location of the tracker at any time. To set up these alerts select the type of alert from the Alerts section of the Menu bar at the bottom of the page. Then select the device to set up by checking next to the name. Select which days to activate the alert along with a start and end time if needed. Enter an email address or cell phone number by selecting the plus sign next to email address. If using a cell phone number select the network carrier and press the done button. Once all settings have been configured, select the Save button at the bottom of the Alert page.
"Generated Excessive Speed at 12/06/2011 8:01:09 AM Message Received at 12/06/2011 1:01:09 PMUTC Excessive Speed:70 mph Last known position lon:-49.084503 Lat:67.707080 Co Rd 705, New York, NY, United States"
What is the Reboot Device button?
The reboot button is a new feature that will send a command to your GPS tracker and attempt to reset the device. If the device is in strong 2g T-Mobile cellular coverage while powered on the device connection to the cellular and GPS network will be disconnected and then attempt to reconnect on its own.
The Locate now button sends a command to your GPS tracker to force a locate at that moment. If the device is in good 2G T-Mobile coverage, good GPS coverage and receives the message it will wake from sleep (if the vehicle isn't moving) and attempt to send a single GPS location before it goes back to sleep.
Why isn't my tracker showing up on the map at all? Please make sure the tracker is powered on (press the power button on the side of the device until you see LED lights come on) and then place the device somewhere with a clear line of sight to the sky and take it on a long drive. Remember that your device reports in intervals (anywhere in between every 1 minute or every 10 minutes) so the device does need to be outside and moving for at least a couple of those intervals for you to get a report.
My tracker shows several different reports within a 5 block radius. Why? Is this accurate? GPS devices often "drift" when reporting their location and this can depend on the surrounding of the GPS device. Every time the device sends a new location it has to receive information from the GPS Satellites and this calculation can differ slightly. The surrounding such as building, trees and the atmosphere can affect the quality of the location that the device provides.
My page is loading weird! Why is some information not displaying? This could be a compatibility concern with the web browser that you are viewing Track.BHS.net on. We have optimized our GPS Platform to display its best on the most widely used web browsers such as Mozilla Firefox and Google Chrome. If you are having problems viewing certain features on our site we recommend that you view it through Mozilla Firefox. You can download and install it for free at http://www.mozilla.org/en-US/firefox/new/
Why is the mobile site not loading on my phone or tablet, but I can see it on my PC? Please try to clear the cookies and cache on your phone's internet browser and load the page again. You can also try using another internet browser on your phones such as Dolphin - which is available for free in the iTunes and Google Play store. If you are still having problems, you will need to contact your mobile carrier or phone manufacturer for support. You can alternatively use our app.
My street view map is old! How can I get this updated? The street view is a feature that is provided by Google Maps who is our preferred mapping vendor. Google occasionally updates these images on their own.
I charged my device but it isn't tracking. What's wrong? If the battery died on your Spark Nano and you recharged it, you must also power it back on, as the device will stay powered off. Please hold down the power button until you see the lights react (hold it down for about 3-4 seconds).
BrickHouse Security is the industry's premier supplier of security and surveillance
solutions. As a recognized authority in GPS tracking, hidden cameras, cell phone/PC
monitoring, video surveillance and counter surveillance, we help our customers use
technology to get the clarity they need. We proudly serve consumers, businesses of
all sizes and the law enforcement community. When you need to know, BrickHouse has