SecureGuard Hidden Cameras with B-Link OnBoard User Guide

Last Updated: Nov 02, 2017 12:21PM EDT


Your SecureGuard 4G Hidden Camera is very simple to setup and use. Follow the instructions below to get started.


For the 4G B-Link Secure Cellular WiFi connector: (Turn On 1st)

1. Fully charge the 4G WiFi connector and the Modem’s Power bank. Turn on the 4G WiFi connector and Power Bank. Then connect the power bank to the modem. Give the 4G WiFi connector up to 90 seconds for it to initialize. Pay attention to the front display before deploying unit in the field. The WiFi connector will display the 4G AT&T network connection.

Power​: It’s highly recommended that the battery icon in the top right corner is full (4 bars).
Wi-Fi​: The 2nd icon from the right shows connected devices. “(1)” shows that the camera is connected. If “(0)” displays, that means the camera is not connected.
4G​: The screen should display “4G” to represent the connection to the AT&T’s 4G network. If “4G” is not displayed. Try reboot the Modem or move to a different area.
Signal: The icon on the top left corner shows cell network signal strength. For an excellent connection, you must receive 4+ bars. 2 bars of less represent a weak connection, The camera should still connect but may be slow or may have a major time lag.


For the camera Module: (Turn On 2nd)

1. For best results, always make sure the battery is full.
2. Connect the USB power cable between the power bank and the camera.
3. Watch for a status near the edge of the camera module. This camera lights should blink when you connect the power. The lights will turn off when the camera is finished initializing. Give the camera up to 5 minutes to fully initialize.

 

PC​ ​Connection​ ​(CloudSEE):


Data​ ​Usage:​ ​The​ ​4G​ ​hidden​ ​camera​ ​will​ ​use​ ​about​ ​5MB/minute​ ​for​ ​the​ ​internet​ ​video stream.​ ​1GB​ ​data ​plan​ ​may​ ​give​ ​you​ ​about​ ​250​ ​minutes​ ​of​ ​live​ ​viewing​ ​time.

1. Install the “JSetup_EN.exe” software on CD provided.
2. After the software finishes installing open the “CloudSEE” icon on your desktop.
3. You will be prompt to enter an ID and PW. Enter ID: ABC PW: 123__
4. Click on “Setting”, go to “CloudSee ID” enter ___B400977343__
5. Username: Admin__ Password: 123__ Click “OK”
6. Your screen might be divided in 4 to connect 4 cameras. Click the large square near the bottom to change the screen division 1.
7. Click “Link All”
8. Now you should be able to watch your camera live.
9. You will be able to watch your camera live from anywhere in the world.






 

iPhone​ ​/​ ​Android​ ​Connection​ ​(“NVSIP”):


Data​ ​Usage:​ ​The​ ​4G​ ​hidden​ ​camera​ ​will​ ​use​ ​about​ ​5MB/minute​ ​for​ ​the​ ​internet​ ​video stream.​ ​1GB​ ​data​ ​plan​ ​may​ ​give​ ​you​ ​about​ ​250​ ​minutes​ ​of​ ​live​ ​viewing​ ​time.

1.Download “NVSIP​”.
2.Open “NVSIP​”, Register an account or access through “Visitor​ ​Login​”.
3.Press the (+)​ icon, Type B400977343​ ​ in the “Please​ ​input​ ​Device​ ​ID​” field.
4.CH Amount: Enter “1​”
5.Username:​ ​ ​Enter ​ ​Admin​ ​ ​ ​ ​ ​ ​ ​PW:​ ​ ​ ​123
6.Click “Add​”.



This User Guide applies to the following products:
Wall Clock Hidden Camera with B-Link Onboard (BL-W4GWC)
SecureGuard 4G Utility Box Hidden Camera w/ B-Link Onboard (BL-W4GUB)
SecureGuard Motion Detector Camera with B-Link Onboard (BL-W4GMD)
SecureGuard 4G Fire Strobe Hidden Camera with B-Link Onboard (BL-W4GFS)
SecureGuard Birdhouse Hidden Camera with B-Link OnBoard (BL-W4GBH)
SecureGuard Landscape Rock Hidden Camera with B-Link Onboard (BL-W4GOR)
SecureGuard Tissue Box Hidden Camera B-Link Onboard (BL-W4GWB)
SecureGuard Exit Sign Hidden Camera with B-Link Onboard (BL-W4GES)
SecureGuard Box Fan Hidden Camera with B-Link Onboard (BL-W4GBF)
SecureGuard 4G iPod Dock Hidden Camera with B-Link Onboard (BL-W4GIPD) 
SecureGuard Portable Fan Hidden Camera with B-Link Onboard (BL-W4GPFN)
SecureGuard Tool Box Hidden Camera with B-Link Onboard (BL-W4GTLB)
SecureGuard Smoke Detector Hidden Camera with B-Link Onboard (BL-W4GSMK)
SecureGuard Carbon Monoxide Detector Cam with B-Link Onboard (BL-W4GCO2)​


 
Please see below for an attached PDF file of the User Guide.
http://assets0.desk.com/
false
desk
Loading
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
about
false
Invalid characters found
/customer/en/portal/articles/autocomplete