Command Force Pro HD DVR Kit Manual and FAQ's (007-DVR520)

Last Updated: May 01, 2018 03:41PM EDT

What do I do if the camera indicator light is off?
This is happening because the control cable is loose or was connected after the device was powered on. Power off the device and then reconnect the cable.

Why is the unit continuously vibrating?
The unit is low on power or the EMS memory is full. Try the following steps:
- Connect the device to power using the charger. 
- Clear EMS memory.
- Add an external Memory Card that is empty.

Please see below for full instructions in the attached copy of the Manual for this device.
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
Invalid characters found