Open the SG Home™ camera to insert the memory card into the memory card slot (if not already inserted from factory). Connect the power supply if using an AC powered camera or charge the battery pack first for approximately 10 hours for a full charge if using a battery operated camera. Power on the camera.
Download the “SG Home” App from Apple Store or Google Play to your smartphone or tablet.
After logging into the SG Home App, click “+” bottom right of the screen to add your camera. Follow the on-screen instructions to select your wireless network:
- : the App chooses the network your device is connected to; if necessary, temporarily leave the app to switch networks on your device prior to entering the network password
- select the network from the drop-down list in the App; if necessary, click “Scan” to search for available networks
Follow the on-screen instructions to select your camera’s network(ex. Device_KJxxxxxxxx) to set it up with your network’s credentials:
- temporarily leave the App to switch networks to the camera’s network and wait for the wi-fi signal-strength meter to return in the status bar, then return to continue setup
- select the camera’s network from the drop-down list in the App; if necessary, click “Scan” to search for available networks
Wi-fi Setup is complete when you see the green check mark. You may now return to SG Home Camera list and begin viewing real-time video.
there may be a few seconds delay while your device reconnects to your network and the App logs back into the servers to retrieve your camera list.
Please see attachment for the manual below.